Reduction Drive Gear: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install the reduction drive gear assembly.NOTE: Press-fit it to the bottom of bearing shoulder completely.
- Install the reduction driven gear. < Ref. to INSTALLATION , Reduction Driven Gear. >
- Join the transmission case and the extension case, and then install the rear vehicle speed sensor. < Ref. to INSTALLATION , Extension Case. >
- Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >