Glove Box: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the console box. < Ref. to REMOVAL , Console Box. >
Remove the console front panel.

Fig 1: Identifying Console Front Panel Hooks

NOTE: For the AT model, remove the ring indicator. For the MT model, remove the shift knob.
Remove the console side garnish.

Fig 2: Identifying Console Side Garnish Hooks
Remove the front inside scuff plate (A) and front pillar lower trim (B). < Ref. to REMOVAL , Lower Inner Trim. >

Fig 3: Identifying Front Inside Scuff Plate And Front Pillar Lower Trim
Remove the clips, and remove the glove box lower cover.

Fig 4: Identifying Glove Box Lower Cover
Remove the console side panel.

Fig 5: Locating Console Side Panel Bolts
Remove the instrument panel side cover, and remove the clip.

Fig 6: Identifying Instrument Panel Side Cover Clips
Remove the screw, and remove the glove box.

Fig 7: Locating Glove Box Screws