Lower Inner Trim: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the hook, and remove the inside scuff plate.

Fig 1: Identifying Inside Scuff Plate Hooks
Remove the door molding (A), and remove the outside scuff plate.

Fig 2: Identifying Door Molding
Remove clip (A), and remove the front pillar lower trim.

Fig 3: Identifying Front Pillar Lower Trim Clip
Remove the rear seat cushion. < Ref. to REMOVAL , Rear Seat. >
Remove clip (A), and remove the inside scuff plate.

Fig 4: Identifying Inside Scuff Plate Clip
Remove door molding (A) and door catcher cover (B), then remove the outside scuff plate.

Fig 5: Identifying Door Molding And Door Catcher Cover
Remove the clips of the center pillar lower trim.

Fig 6: Locating Clips Of Center Pillar Lower Trim