Read Current Data: Operation
WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
- On the «Main Menu» display screen, select the {Each System Check}.
- On the «System Selection Menu» display screen, select the {Integ. Unit mode}.
- On the «Integ. Unit mode failure diag» display screen, select the {Current Data Display & Save}.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
<Ref. to DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor. > <Ref. to DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor. > <Ref. to CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor. >