Front Seat: Installation

Install in the reverse order of removal.

NOTE: Tighten the slide rail installing bolt gradually in several steps to the specified torque in the order as shown in the figure.

Fig 1: Identifying Slide Rail Installing Bolt Tightening Sequence

Courtesy of SUBARU OF AMERICA, INC.

CAUTION: Be sure to perform the system calibration for occupant detection system after passenger's seat installation. <Ref. to SYSTEM CALIBRATION (REZEROING) OPERATION, Subaru Select Monitor. > Failure to do so may cause improper activation of passenger's airbag.

Tightening torque:

Refer to "COMPONENT " of "General Description". <Ref. to FRONT SEAT COMPONENT, General Description. >