LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2003 >> Impreza RS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Reduction Driven Gear >> Installation >> VTD Model

VTD Model

  1. Set the range select lever to "P".
  2. Using a plastic hammer, install the reduction driven gear assembly.
  3. Using a plastic hammer, install the center differential.
  4. Install a new self locknut and washer.
    1. Tightening torque:  100 N.m (10.2 kgf-m, 73.8 ft-lb)
    Fig 1: Installing New Self Locknut & Washer
    G01998979Courtesy of SUBARU OF AMERICA, INC.
  5. After tightening, stake the lock nut securely.
  6. Insert the rear drive shaft assembly. See INSTALLATION , Rear Drive Shaft.
  7. Combine the transmission case with the extension case, and install rear wheel speed sensor. See INSTALLATION , Extension Case.
  8. Install the transmission assembly to the vehicle. See INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About LEMON Manuals