LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Impreza RS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Servicing >> Removal & Installation >> Select Cable >> Installation

Select Cable: Installation

  1. Install select cable to plate assembly.
  2. Install select cable to range select lever.
  3. Install plate assembly to transmission. See Figure .
  4. Install snap pin to range select lever. See Figure .
  5. Insert the thread portion of the other inner cable and into connector hole of the select lever, and fix the other outer cable end to bracket.
  6. Move the select lever to the "N" position, then adjust the select cable position. See SELECT CABLE  under ADJUSTMENTS.
  7. Install heat shield cover.
  8. Install the front and center exhaust pipe. (Non-Turbo Model)
  9. Install the center exhaust pipe. (Turbo Model)
scientia non olet · About LEMON Manuals