LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Automatic Transmission) >> Reduction Drive Gear >> Removal

Reduction Drive Gear: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL , Automatic Transmission Assembly.
  2. Remove rear vehicle speed sensor, and separate the transmission case and extension case.

    Refer to REMOVAL , Extension Case.

  3. Remove the reduction driven gear. Refer to REMOVAL , Reduction Driven Gear.
  4. Using ST, extract the reduction drive gear.

    ST1 499737100 PULLER

    ST2 899524100 PULLER SET

    Fig 1: Removing Reduction Drive Gear
    G02093199Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals