LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Automatic Transmission) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL , Automatic Transmission Assembly.
  2. Remove rear vehicle speed sensor, and separate the transmission case and extension case. Refer to REMOVAL , Extension Case.
  3. Set the range select lever to "P".
  4. Straighten the staked portion, and remove the lock nut.
    Fig 1: Removing Lock Nut
    G02093192Courtesy of SUBARU OF AMERICA, INC.
  5. Using the ST1 and ST2, extract the reduction driven gear.

    ST1 499737000 PULLER

    ST2 899524100 PULLER SET

    Fig 2: Removing Reduction Driven Gear
    G02093193Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals