Rear Axle Hub: Installation

INSTALL REAR AXLE HUB AND BEARING ASSEMBLY
1. Install the axle hub and bearing onto the axle beam with the 4 bolts.
  Torque: 90 N*m (918 kgf*cm, 67 ft.*lbf)
  
  Fig 1: Locating Bolts And Axle Hub
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT REAR AXLE HUB BEARING (See ON-VEHICLE INSPECTION )
CONNECT SPEED SENSOR WIRE
1. Connect the skid control sensor wire connector.
INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
ADJUST REAR DRUM BRAKE SHOE CLEARANCE (See INSTALLATION )
INSTALL REAR WHEEL
Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)
CHECK ABS SENSOR SIGNAL
HINT:

(See TEST MODE PROCEDURE )