LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2000 >> SW2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Ignition System >> Camshaft Position Sensor >> Notes

Camshaft Position Sensor: Notes

NOTE: On 1.0L, camshaft position sensor is located in distributor housing and may also be referred to as a pick-up coil. See Figure. Adjust signal rotor air gap to .008-.016" (0.2-0.4 mm) by moving camshaft position sensor in relation to signal rotor.
scientia non olet · About LEMON Manuals