To remove
- Remove the power steering pump, see TO REMOVE TO REMOVE .
- Press in the end cover with a puller and remove the circlip through the hole in the pump housing.
- Remove the end cover by lightly tapping the pump housing against a vice or similar until the cover comes loose.
- Remove the O-ring from the end cover.
- Remove the thrust washer and the end cover.
- Remove the O-ring from the pump housing.
- Remove the circlip from the pump shaft.
- Remove the pump shaft with belt pulley.
- Remove the rotor, pump vanes, pump ring and inner end plate as one unit.
- Remove the pump shaft seal.