LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Automatic Transmission Servicing) >> Removal & Installation >> TCC Pulse Width Modulation Solenoid >> Installation

TCC Pulse Width Modulation Solenoid: Installation

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TCC PWM solenoid (334).
  2. Install the TCC PWM solenoid retaining clip (314F).
  3. Connect the TCC PWM solenoid electrical connector.
  4. Install the oil pump to the valve body. See Figure .
  5. Install the oil pump bolts (206 and 207) and tighten as follows:
    • Bolt No. 207 - 106 INCH lbs. (12 N.m).
    • Bolt No. 206 - 12 ft. lbs. (16 N.m).

    See Figure .

  6. Reposition and connect the electrical connectors to the following:
    • Fluid pressure manual valve position switch assembly. See Figure .
    • 2-3 Shift solenoid valve assembly.
  7. Install the case side cover. See CASE SIDE COVER  .
scientia non olet · About LEMON Manuals