LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1998 >> Voyager Base, 2.4 B >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Programming >> Remote Transmitter >> Customer Programming Method

Customer Programming Method

NOTE: Following procedure requires a functional transmitter. If a functional transmitter is not available, program RKE module using scan tool. See SCAN TOOL PROGRAMMING METHOD  .
  1. Using a functional transmitter, unlock vehicle and disarm anti-theft system. Turn ignition on. Depress and hold transmitter UNLOCK button for 4-10 seconds. While holding UNLOCK button, press and release PANIC button (before 10 seconds has passed).
  2. A single chime will sound to verify RKE module is set to receive new transmitter code. Within 30 seconds of chime, actuate any button on each new transmitter. After 30 seconds or when ignition switch is turned off (LOCK position), RKE module will end programming mode.
  3. Once programming mode is completed, a single chime will sound. Turn ignition off. Verify new transmitter(s) operation.
scientia non olet · About LEMON Manuals