Work Procedure

WARNING: This page is about a different car, the 2013 Nissan NV200. However, it is still accessible from the selected car via links, so may be relevant.

START
With CONSULT
1. Turn ignition switch ON.
2. Select "CLSD THL POS LEARN" in "WORK SUPPORT" mode of "ENGINE" using CONSULT.
3. Follow the instructions on the CONSULT display.
4. Turn ignition switch OFF and wait at least 10 seconds.
  Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
Without CONSULT
1. Start the engine.
  NOTE: Engine coolant temperature is 25°C (77°F) or less before engine starts.
2. Warm up the engine.
  NOTE: Raise engine coolant temperature until it reaches 65°C (149°F) or more.
3. Turn ignition switch OFF and wait at least 10 seconds.
  Check that throttle valve moves during the above 10 seconds by confirming the operating sound.
  
  : END