LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2014 >> NV200 SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Control System (Introduction)) >> Basic Inspection >> How To Set SRT Code >> SRT Set Driving Pattern

SRT Set Driving Pattern

WARNING: This page is about a different car, the 2013 Nissan NV200. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always drive the vehicle in safe manner according to traffic conditions and obey all traffic laws.
Fig 1: SRT Set Driving Pattern
G07051180Courtesy of NISSAN NORTH AMERICA, INC.
NOTE: *1: Depress the accelerator pedal until vehicle speed is 90 km/h (56 MPH), then release the accelerator pedal and keep it released for more than 10 seconds. Depress the accelerator pedal until vehicle speed is 90 km/h(56 MPH) again.
*2: Checking the vehicle speed with GST is advised.
  • The time required for each diagnosis varies with road surface conditions, weather, altitude, individual driving habits, etc.

Zone A refers to the range where the time, required for the diagnosis under normal conditions*, is the shortest.

Zone B refers to the range where the diagnosis can still be performed if the diagnosis is not completed within zone A.

*: Normal conditions refer to the following: