Trouble Diagnoses Symptom Chart
Check that other systems using the signal of the following systems operate normally.
TROUBLE DIAGNOSES SYMPTOM CHART
| Symptom | Repair order |
|---|---|
| None of the power windows can be operated using any switch | 1. BCM power supply and ground circuit check |
| 2. Main power window and door lock/unlock power supply and ground circuit check | |
| 3. Replace main power window and door lock/unlock switch | |
| Front power window LH alone does not operate | 1. Front power window motor LH circuit check |
| 2. Replace main power window and door lock/unlock switch | |
| Front power window RH does not operate from power window and door lock/unlock switch RH only | 1. Front power window RH circuit check (power window and door lock/unlock switch RH operation) |
| Front power window RH does not operate from main power window and door lock/unlock switch only | 1. Replace main power window and door lock/unlock switch |
| Front power window RH does not operate from any switch | 1. Front power window motor RH circuit check |
| Anti-pinch system does not operate normally (Front LH) | 1. Door window sliding part malfunction
|
| 2. Encoder circuit check | |
| Rear power window LH does not operate from rear power window switch LH only | 1. Rear power window LH circuit check (rear power window switch LH operation) |
| Rear power window LH does not operate from main power window and door lock/unlock switch only | 1. Replace main power window and door lock/unlock switch |
| Rear power window LH does not operate from any switch | 1. Rear power window motor LH circuit check |
| Rear power window RH does not operate from rear power window switch RH only | 1. Rear power window RH circuit check (rear window switch RH operation) |
| Rear power window RH does not operate from main power window and door lock/unlock switch only | 1. Replace main power window and door lock/unlock switch |
| Rear power window RH does not operate from any switch | 1. Rear power window motor RH circuit check |
| Power window retained power operation does not operate properly | 1. Check the retained power operation mode setting. |
| 2. Door switch check | |
| 3. Replace BCM. |