Component Inspection
Disconnect TP sensor harness connectors. Measure resistance across specified terminals. See TP SENSOR RESISTANCE table. Replace or adjust as necessary. See appropriate ON-VEHICLE ADJUSTMENTS article in ENGINE PERFORMANCE.
TP SENSOR RESISTANCE
| Measure Between Terminals No. (1) | Accelerator Position | Approximate Ohms | |||
|---|---|---|---|---|---|
| Closed TP Switch | |||||
| 5 & 6 | Released | 0 | |||
| 5 & 6 | Depressed | Infinite | |||
| Wide Open TP Switch | |||||
| 4 & 5 | Released | Infinite | |||
| 4 & 5 | Depressed | 0 | |||
|
|||||