Continuously Variable Transmission (CVT)

• Service Specifications
• Lubricant
• Special Tools
• Diagnosis
  • Standard Flow Of Diagnostic Troubleshooting
  • Initialization Procedure For CVT Learned Value
    • Notes
    • Aim
    • Initialization Procedure
  • CVT Fluid Pressure Control Learning Procedure
    • Notes
    • Aim
    • Learning Procedure
  • Fluid Deterioration Level Erasing Procedure
  • Diagnostic Function
    • Warning Indicator
    • On-Board Diagnostics
    • How To Connect The Scan Tool (M.U.T.-III)
    • How To Read And Erase Diagnostic Trouble Codes
    • How To Read Data List
    • How To Diagnose The Can Bus Lines
  • Freeze Frame Data Reference Table
  • Road Test
  • Ratio Pattern
    • <D Range>
    • <Ds RANGE>
    • <L Range>
  • Torque Converter Clutch Operation Range
  • Diagnostic Trouble Code Chart
  • Diagnostic Trouble Code Procedures
    • DTC P0703: Malfunction of Brake Switch
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0705: Malfunction of Transmission Range Switch
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Other Rationality)
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Open Circuit)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0711: Malfunction of Transmission Fluid Temperature Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0712: Malfunction of the Transmission Fluid Temperature Sensor (Low Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0713: Malfunction of the Transmission Fluid Temperature Sensor (High Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0715: Malfunction of Primary Pulley Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS [Monitor Sequence-Input Rationality-Low (Open/Low Revolution)]
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Open Circuit)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P071B: Malfunction of Ds Position Switch (Stuck ON) DTC P071C: Malfunction of Ds Position Switch (Stuck OFF)
      • Diagnostic Function
      • Descriptions Of Monitor Methods <P071B>
      • Monitor Execution <P071B>
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Rationality-Low) <P071B>
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern <P071B>
      • Descriptions Of Monitor Methods <P071C>
      • Monitor Execution <P071C>
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC set in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Rationality-High) <P071C>
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern <P071C>
      • Probable Causes
      • Diagnosis
    • DTC P0720: Malfunction of Output Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS [Monitor Sequence-Input Rationality Low (Open/Low revolution)]
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Open Circuit)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0741: Abnormality in Lockup Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0746: Abnormality in Hydraulic Control System Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0791: Malfunction of Secondary Pulley Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS [Monitor Sequence-Input Rationality Low (Open/Low Revolution)]
      • LOGIC FLOW CHARTS (Monitor Sequence-Input Open Circuit)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0796: Abnormality in Primary Pressure Solenoid Valve Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence-Output Functional Low)
      • LOGIC FLOW CHARTS (Monitor Sequence-Output Functional High)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • Code P0841: Abnormality in Secondary Pressure Sensor Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0842: Malfunction of the Secondary Pressure Sensor (Low Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0843: Malfunction of the Secondary Pressure Sensor (High Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0876: Malfunction of High Clutch Oil Pressure Switch
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution (Stuck On)
      • Monitor Execution (Stuck Off)
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence - Stuck ON)
      • DTC SET CONDITIONS (Stuck ON)
        • Check Conditions
        • Judgment Criteria
      • LOGIC FLOW CHARTS (Monitor Sequence - Stuck OFF)
      • DTC SET CONDITIONS (Stuck OFF)
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0962: Malfunction of the Line Pressure Solenoid Valve (Short to Ground)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0963: Malfunction of the Line Pressure Solenoid Valve (Open Circuit/Short to Power Supply)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0970: Malfunction of the Primary Pressure Solenoid Valve (Short to Ground)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0971: Malfunction of the Primary Pressure Solenoid Valve (Open Circuit/Short to Power Supply)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0973: Malfunction of the Low Brake Solenoid Valve (Short to Ground)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0974: Malfunction of the Low Brake Solenoid Valve (Open Circuit/Short to Power Supply)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0976: Malfunction of the High Clutch and Reverse Brake Solenoid Valve (Short to Ground)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0977: Malfunction of the High Clutch and Reverse Brake Solenoid Valve (Open Circuit/Short to Power Supply)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P1607: Malfunction of the System Power Supply (Low Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P1637: Malfunction of Memory Backup
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Condition
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P170E: ASC Error Information
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P1797: G Sensor/Brake Pressure Sensor Malfunction
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence - G Sensor Signal Malfunction)
      • LOGIC FLOW CHARTS (Monitor Sequence - Brake Pressure Sensor Signal Malfunction)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2763: Malfunction of the Lockup Solenoid Valve (Open Circuit/Short to Power Supply)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2764: Malfunction of the Lockup Solenoid Valve (Short to Ground)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2857: Auxiliary Gearbox Gear 1 Incorrect Ratio Run-up
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2858: Auxiliary Gearbox Gear 2 Incorrect Ratio Run-up
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2859: Auxiliary Gearbox Gear 1 Incorrect Ratio
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P285A: Auxiliary Gearbox Gear 2 Incorrect Ratio
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0001: Malfunction of CAN Communication Circuit (Bus Off)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0100: CAN Time-out Error (Engine)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0121: CAN Time-out Error (ASC)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0141: CAN Time-out Error (ETACS)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
        • Sensor (The sensor below is determined to be normal)
      • LOGIC FLOW CHARTS (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0155: CAN Time-out Error (Combination Meter)
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
  • Trouble Symptom Diagnosis Chart
    • Notes
    • Trouble Symptom Chart
      • Notes
      • Possible cause chart
  • Data List Reference Table
  • TCM Terminal Voltage Reference Chart For Transaxle Operation
  • Oscilloscope Inspection Procedures
    • Notes
    • Waveform Sample
      • Waveform A
      • Waveform B
• On-Vehicle Service
  • Essential Service
    • Transmission Fluid Check
    • Transmission Fluid Replacement
    • Transmission Range Switch Continuity Check
    • Transmission Range Switch And Control Cable Adjustment
  • CVT Control Component Layout
• CVT Control Component Check
  • Transmission Range Switch Check
  • Solenoid Valve Check
  • Transmission Fluid Temperature Sensor Check
  • Torque Converter Stall Test
    • Notes
    • Judgment Of Torque Converter Stall Test Results
  • Hydraulic Pressure Test
  • Selector Lever Operation Check
  • Shift Lock Mechanism Check
    • System Check
    • Component Parts Check Shift Lock Link
    • Shift Lock Solenoid
• Transaxle Control
  • Removal And Installation
    • Notes
    • Removal Service Point
      • <<A>> Clip Removal
    • Installation Service Point
      • >>A<< Clip/Transaxle Control Cable (Transaxle Side) Installation
  • Selector Lever Assembly Continuity Check
    • Switch Check
    • Key Lock Relay Check <Vehicles Without Kos>
• Oil Filter
  • Removal And Installation
• Oil Pan And Valve Body Assembly
  • Removal And Installation
    • Notes
    • Removal Service Points
      • <<A>> Disconnecting The CVT Assembly Connector
      • <<B>> Manual Plate Removal
      • <<C>> Valve Body Assembly Removal
    • Installation Service Points
      • >>A<< Valve Body Assembly Installation
      • >>B<< Manual Plate Installation
      • >>C<< Fluid Strainer Installation
      • >>D<< Oil Pan Installation
• Transaxle Assembly
  • Removal And Installation
    • Notes
    • Removal Service Points
      • <<A>> CVT Assembly Harness Connector Disconnection
      • <<B>> Transaxle Assembly Upper Part Coupling Bolt Removal
      • <<C>> Torque Converter And Drive Plate Coupling Bolt Removal
      • <<D>> Engine Assembly Supporting
    • Installation Service Point
      • >>A<< Transaxle Assembly Installation
• Transaxle Control Module (TCM)
  • Removal And Installation
• Transmission Fluid Cooler Line
  • Removal And Installation
    • Notes
    • Installation Service Points
      • >>A<< Water Return Hose
      • >>B<< Water Feed Hose Installation