LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2017 >> Outlander SEL, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle On-Vehicle Service - With Diagnostics) >> On-Vehicle Service >> Automatic Transaxle Control Component Check >> Shift Lock Mechanism Check >> Component Parts Check >> Shift Lock Solenoid

Shift Lock Solenoid

WARNING: This page is about a different variant/trim than selected.
  1. Measure the resistance between terminal No. 3 and No. 7 of the selector lever assembly connector.

    Standard value: 24 ± 1.2 Ω 

  2. When the resistance is outside the standard value, replace the selector lever assembly.
Fig 1: Locating Selector Lever Assembly Connector Terminals
G10223391Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals