Service Specifications
WARNING: This page is about a different variant/trim than selected.
| Item | Standard value | Limit | |
|---|---|---|---|
| Rear axle total backlash mm (in) | - | 5 (0.2) | |
| Wheel bearing end play mm (in) | - | 0.05 (0.002) | |
| Hub rotation starting torque N.m (in-lb) | - | 1.4 (12) | |
| ETJ boot assembly dimension mm (in) | 75 ± 3 (2.95 ± 0.12) | - | |
| Electronic control coupling stud bolt length mm (in) | 22.3 - 25.1 (0.88 - 0.99) | - | |
| Final drive gear backlash mm (in) | 0.08 - 0.15 (0.003 - 0.006) | - | |
| Drive gear runout on backside mm (in) | - | 0.05 (0.002) | |
| Differential gear backlash mm (in) | 0 - 0.076 (0 - 0.0030) | 0.2 (0.01) | |
| Drive pinion rotation torque N.m (in-lb) | When replaced with new one (coated with rust inhibitor oil) |
0.7 - 1.2 (7 - 10) | - |