LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2015 >> RVR ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Rear Axle - AWD) >> Differential Carrier Assembly >> Assembly >> Assembly Service Point >> Lock Pin Installation

Lock Pin Installation

WARNING: This page is about a different variant/trim than selected.
  1. Align the lock pin holes in the pinion shaft and in the differential case, and drive in the lock pin.
  2. Use a punch to crimp two points.
    Fig 1: Driving Lock Pin
    G05432247Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals