LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Controls - Remove/Install/Overhaul) >> Fuel System >> Mass Airflow Sensor >> Removal & Installation (6-Cylinder)

Removal & Installation (6-Cylinder)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1997 BMW Z3, 1997 BMW M3, 1997 BMW 840Ci, 1997 BMW 740iL, and 1997 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn coupling and disconnect mass airflow sensor connector. Loosen hose clamp and pull off bellows.
  2. Loosen screws or open fasteners at air cleaner assembly. Remove mass airflow sensor and bellows. See Figure. To install, reverse removal procedure. Ensure mass airflow sensor grille is not damaged during installation.
scientia non olet · About LEMON Manuals