61 31 006 Removing And Installing/Replacing Fixture For Steering Column Stalk (Up To 09/2005)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Move wheels into straight-ahead position and do not alter this position during the repair work.

IMPORTANT:

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove TOP SECTION OF STEERING COLUMN CASING .
If necessary, remove deformation element for steering column trim.

NOTE:

Comply NOTES AND INSTRUCTIONS ON HANDLING FIBRE OPTIC CABLES .

Release screws (1).

Pull back fixture for steering column switch (2) in direction of arrow.

Disconnect plug connections behind and remove fixture for steering column stalk (2).

Fig 1: Removing Fixture For Steering Column Stalk

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove TURN INDICATOR/HEADLIGHT DIPPING SWITCH
Remove WINDSHIELD WIPER SWITCH
If necessary, remove CRUISE CONTROL SWITCH
Remove VOLUTE SPRING CASSETTE

Replacement:

Carry out PROGRAMMING/CODING
Vehicles without active front steering:
- Carry out STEERING ANGLE SENSOR ADJUSTMENT
Vehicles with active front steering:
- Carry out ACTIVE FRONT STEERING START-UP/ADJUSTMENT .