32 31 004 Removing And Installing / Replacing Upper Section Of Steering Column Trim

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove LOWER SECTION OF TRIM
Move steering column into "lower" and "extended" position

Unclip steering column cover (1) from upper section of trim.

Fig 1: Identifying Steering Column Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 2: Locating Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Bend upper section of trim on both sides outwards and remove towards top.

Fig 3: Bending Upper Section Of Trim On Both Sides Outwards

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 4: Identifying Locks And Hooks

Courtesy of BMW OF NORTH AMERICA, INC.