32 00... Moving Vehicle Into Design Position
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move VEHICLE INTO NORMAL POSITION .
- Version with air spring system:
- Remove ignition key
- Pull fuse for air supply unit control unit
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to FRONT AXLE - RIDE HEIGHT E60
. RIDE HEIGHT E60 / 530I, 550I / SECURITY
, or RIDE HEIGHT E60 LONG VERSION
and REAR AXLE - RIDE HEIGHT E60
, RIDE HEIGHT E60 / 530I, 550I / SECURITY
, or RIDE HEIGHT E60 / LONG VERSION
).
Measure RIDE-LEVEL HEIGHT OF VEHICLE