32 00... Moving Vehicle Into Normal Position
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with TEST CONDITIONS , bring vehicle to a stop if necessary.
- Version with air spring system: Carry out ride-height-calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to CHASSIS/WHEEL ALIGNMENT - NORMAL POSITION E60, E61 ) into vehicle
- Determine VEHICLE RIDE HEIGHTNOTE: If the vehicle ride height is not inside the tolerance (refer to FRONT AXLE - RIDE HEIGHT E60 . RIDE HEIGHT E60 / 530I, 550I / SECURITY , or RIDE HEIGHT E60 LONG VERSION and REAR AXLE - RIDE HEIGHT E60 , RIDE HEIGHT E60 / 530I, 550I / SECURITY , or RIDE HEIGHT E60 / LONG VERSION ), the vehicle must be repaired (coil spring/leakage).