32 31 020 Removing and installing / replacing lower section of steering column trim

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT SECTION OF TRIM
Move steering column in "top" and "extended" position.

Release screw.

Unclip lower trim section (1).

If necessary, unclip wiring harness from lower trim section (1).

Installation:

Replace expansion rivet.

Fig 1: Removing Lower Section Of Steering Column Trim

G04742437

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 2: Identifying Locks And Hooks

G04742434

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip steering column cover (1) from lower section of trim (2).

Remove lower section of trim (2).

Fig 3: Identifying Steering Column Cover And Lower Section Of Trim

G04742439

Courtesy of BMW OF NORTH AMERICA, INC.