32 31 004 Removing and installing / replacing upper section of steering column trim

WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove LOWER SECTION OF TRIM
Move steering column into "lower" and "extended" position

Unclip steering column cover (1) from upper section of trim.

Fig 1: Identifying Steering Column Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 2: Locating Steering Column Trim Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Bend upper section of trim on both sides outwards and remove towards top.

Fig 3: Removing Steering Column Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 4: Identifying Locks And Hooks

Courtesy of BMW OF NORTH AMERICA, INC.