32 31 020 Removing and installing / replacing lower section of steering column trim

WARNING: This page is about a different car, the 2010 BMW 535i, 2009 BMW 535i, and 2008 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT SECTION OF TRIM
Move steering column in "top" and "extended" position.

Release screw.

Unclip lower trim section (1).

If necessary, unclip wiring harness from lower trim section (1).

Installation:

Replace expansion rivet.

Fig 1: Removing Lower Section Of Steering Column Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 2: Identifying Locks And Hooks

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip steering column cover (1) from lower section of trim (2).

Remove lower section of trim (2).

Fig 3: Identifying Steering Column Cover And Lower Section Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.