Symptom Table

WARNING: This page is about a different variant/trim than selected.

NOTE: NVH symptoms should be identified using the diagnostic tools that are available. For a list of these tools, an explanation of their uses and a glossary of common terms, refer to NOISE, VIBRATION AND HARSHNESS (NVH) . Since it is possible any one of multiple systems may be the cause of a symptom, it may be necessary to use a process of elimination type of diagnostic approach to pinpoint the responsible system. If this is not the causal system for the symptom, refer to NOISE, VIBRATION AND HARSHNESS (NVH) for the next likely system and continue diagnosis.

SYMPTOM TABLE

Condition	Possible Sources	Action
Clunk - occurs when shifting from PARK to a DRIVE or REVERSE position	Damaged transmission insulators	INSPECT the transmission insulators for damage. INSTALL new insulators as necessary. REFER to Removal and Installation or Installation .