Table Of Contents For Function Description Of Gasoline Injection And Ignition System With Direct Injection - GF07.70-S-0998TRJ
Engine 274 in model 447.6/7
with code XM0 (Facelift)
| Gasoline injection and ignition system with direct injection, function | GF07.70-S-0002TRJ | ||
| Ignition ON, function | GF07.10-S-1000TRJ | ||
| Starting, function | GF07.10-S-1001TRJ | ||
| Ignition OFF, function | GF07.10-S-1002TRJ | ||
| Fuel supply, function | GF07.10-S-1003TRJ | ||
| Injection regulation, function | GF07.10-S-1004TRJ | ||
| Ignition system function | GF07.10-S-1005TRJ | ||
| Synchronize fuel injection and firing order function | GF07.10-S-1006TRJ | ||
| Crankcase ventilation system, function | GF01.20-S-0001TRJ | ||
| Camshaft adjustment, function | GF05.20-S-0003TRJ | ||
| Start, post-start phase and warm-up enrichment, function | GF07.10-S-1007TRJ | ||
| Rpm control, function | GF07.10-S-1008TRJ | ||
| Alternator interface function | GF07.10-S-1009TRJ | ||
| Lambda control, function | GF07.10-S-1010TRJ | ||
| Smooth running control, function | GF07.10-S-1011TRJ | ||
| Thermal management, function | GF07.10-S-1012TRJ | ||
| Torque coordination, function | GF07.10-S-1013TRJ | ||
| Overrun mode fuel shutoff, function | GF07.10-S-1014TRJ | ||
| Knock control, function | GF07.10-S-1015TRJ | ||
| Engine limp-home mode, function | GF07.10-S-1019TRJ | ||
| European OBD, function | GF07.10-S-1021TRJ | ||
| ECO start/stop function engine management, function | With CODE MJ8 (ECO start/stop function) | GF07.10-S-1042TRJ | |
| Charging, function | GF09.00-S-2000TRJ | ||
| Exhaust gas cleaning, function | GF49.20-S-3000TRJ | ||
| Overview of system components for gasoline injection and ignition system with direct injection | GF07.70-S-9998TRJ | ||
| Function schematic for European On-Board Diagnostics (EOBD) | PE00.30-S-2500TRM | ||
| Function schematic for crankcase ventilation system | PE01.20-S-2500TRH | ||
| Function schematic for camshaft adjustment | PE05.20-S-2500TRH | ||
| Function schematic for rpm control | PE07.10-S-2500TRN | ||
| Function schematic for torque coordination | PE07.10-S-2501TRM | ||
| Function schematic for smooth running control | PE07.10-S-2502TRM | ||
| Function schematic for safety fuel shutoff | PE07.10-S-2503TRM | ||
| Function schematic for alternator interface | PE07.10-S-2504TRM | ||
| Function schematic for ignition ON | PE07.10-S-2505TRM | ||
| Function schematic for ignition OFF | PE07.10-S-2506TRM | ||
| Function schematic for starting | PE07.10-S-2507TRM | ||
| Function schematic for overrun mode fuel shutoff | PE07.10-S-2508TRM | ||
| Function schematic for start/stop | With CODE MJ8 (ECO start/stop function) | PE07.10-S-2509TRM | |
| Function schematic for engine limp-home mode | PE07.10-S-2510TRM | ||
| Function schematic for lambda control | PE07.10-S-2511TRL | ||
| Function schematic for injection control | PE07.61-S-2500TRM | ||
| Function schematic for knock control | PE07.61-S-2501TRH | ||
| Function schematic for ME synchronization of fuel injection and firing order | PE07.61-S-2502TRH | ||
| Function schematic for charging | PE09.00-S-2500TRM | ||
| Function schematic for ignition system | PE15.10-S-2500TRH | ||
| Function schematic for heat management | PE20.00-S-2502TRM | ||
| Function schematic for fuel supply system | PE47.00-S-2500TRL | ||
| Function schematic for purging | PE47.30-S-2500TRH | ||
| Function schematic for exhaust gas cleaning | PE49.00-S-2500TRM | ||
| Electrical function schematic for alternator management | PE54.10-S-2064TRL | ||
| Function schematic, ECO start/stop function energy management | With CODE MJ8 (ECO start/stop function) | PE54.10-S-2500TRK |