Multicontour seat (MCS), function - GF91.25-P-0001LE
MODEL 216.3 with CODE (409) Left/right front multicontour seat as of model year 2009 /YoM 08
MODEL 221.0 /1 with CODE (409) Left/right front multicontour seat as of model year 2009 up to 2010 /YoM 08 up to YoM 09
MODEL 221.0 /1 with CODE (406) Rear multicontour seat as of model year 2009 /YoM 08
Function requirements, general
- Terminal 15R ON or
- Circuit 15 ON
- Pressure supply active (no timeout)
- Status of pneumatics pump for multicontour seat (M40) on interior CAN (CAN B) OK
- No on-board electrical system limp-home mode
Function description for multicontour seat (MCS [MKS]), general
The multicontour seats (MCS [MKS]) can be adjusted individually. The contour and the surface hardness of the backrest as well as the air cushions in the side area of the backrest can be adjusted independently of each other by inflating and deflating the particular air cushions.
The compressed air supply is provided by the pneumatics pump for the multicontour seat.
Code (409) Left/right front multicontour seats
The individual functions can be adjusted with menu assistance on the front central operating unit (A40/9) and are indicated on the COMAND display (A40/8) (without code (867) SPLITVIEW) or SPLITVIEW display (A40/10) (model 216 as of YoM 09 with code (867) SPLITVIEW). Adherence to the set pressure values as well as the specified pressures of the individual cushion areas is continuously being regulated. The front central operating unit can be used to manually adjust the contours of the various air cushions in the multicontour seat by means inflation and deflation, actuated by the left front multicontour backrest control unit (N32/15) or right front multicontour backrest control unit (N32/16).
The air cushions in the front seats are arranged as follows:
- on the left- and right-hand sides of the backrest
- in the seat cushion side area at the left and right,
- in the upper lumbar area
- in the center lumbar area
- In the lower lumbar support area
- in the shoulder area at the left and right
Priorities
When several functions are requested at the same time, only the adjustment motion with the highest priority is executed.
Priority 1: Lateral backrest support
Priority 2: Lumbar support
Priority 3: Lateral seat cushion support
Priority 4: Shoulder cushion
Code (406) Rear multicontour seat (model 221 only)
The individual functions can be manually configured via the RCP [HBF] control unit (N72/2). To prevent any tension in the back during long journeys, the multicontour seat is equipped with a massage (pulse mode) function. As long as the massage function is active, the contour of the 7-layer massage insert is sequentially altered by inflating, maintaining and relieving the pressure. The massage function can be adjusted individually in 2 stages with the intense massage function button (N72/2s18) and the non-intense massage function button (N72/2s17). Maintenance of the set pressure values as well as nominal pressures of the individual cushion areas is controlled continuously by the left rear multicontour backrest (N32/20) or right rear multicontour backrest (N32/21).
The rear control panel control unit can be used to manually adjust the various air cushions in the multicontour backrest, actuated by the left rear multicontour backrest control unit or the right rear multicontour backrest control unit.
The air cushions in the backrests of the outer individual rear seats are located as follows:
- on the left- and right-hand sides of the backrest
- in the upper lumbar area
- in the center lumbar area
- In the lower lumbar support area
Priorities
When several functions are requested at the same time, only the adjustment motion with the highest priority is executed.
Priority 1: Lateral backrest support
Priority 2: Lumbar support
Priority 3: Massage function (pulsation or dynamic lumbar support)
PRE-SAFE
In critical situations, the air cushions are inflated in the side area before the imminent accident; on the front multicontour seats the air cushions in the lumbar are deflated additionally; this is accomplished to obtain a more favorable seat position and arrest the passengers' bodies. For more detailed information refer to the PRE-SAFE system description.
The multicontour seat system enables the following subfunctions, which are described in separate documents:
- Adjust front multicontour seats, function
- Adjust rear multicontour seats, function (with code (406) Rear multicontour seats only)
- Dynamic inflation/deflation of air cushions in multicontour seat (with code (406) Rear multicontour seat only)
- Storing and calling multicontour seat (MCS) seat position (on model 221 with code (275) Memory package for electrically adjustable front seats or with code (406) with code (276) Memory in rear or on model 216)
| Multicontour seat (MCS), location of components | GF91.25-P-0001-04LE | ||
| Multicontour seat (MKS) block diagram | GF91.25-P-0001-06LE | ||
| Adjust front multicontour seats, function | Vehicles with code (409) Left/right front multicontour seats | GF91.25-P-2002LE | |
| Adjust rear multicontour seats, function | Model 221 with code (406) Rear multicontour seat | GF91.25-P-2003LE | |
| Dynamic filling/emptying of air in the air cushions in the multicontour seat, function | Model 221 with code (406) Rear multicontour seat | GF91.25-P-2001LE | |
| Save/retrieve seat position of multicontour seat (MCS [MKS]), function | Model 216 Model 221 with code (275) Memory package for electrically adjustable front seats or with code (276) Memory in rear |
GF91.25-P-2017LE | |
| COMAND controller unit, component description | A40/3 On vehicles with code (526) COMAND with single DVD drive (without navigation) or with code (527) COMAND APS with single DVD drive (with navigation) |
GF82.85-P-3136LE | |
| On vehicles with code (529) HIGH Class Japan | GF82.85-P-3136LEJ | ||
| On vehicles with code (530) COMAND APS USA (with navigation) | GF82.85-P-3136LEU | ||
| COMAND display, component description | A40/8 Except code (867) SPLITVIEW |
GF54.30-P-6110LE | |
| Front central operating unit, component description | A40/9 | GF54.21-P-4500LE | |
| SPLITVIEW display, component description | A40/10 MODEL 216 as of model year 2010 /YoM 09 with code (867) SPLITVIEW MODEL 221 as of model year 2010 /YoM 09 MOPF with code (867) SPLITVIEW |
GF54.30-P-6120LE | |
| Multicontour seat pneumatic pump (MCS), component description | M40 | GF91.25-P-5205LE | |
| Rear seats control unit, component description | N25/6 Model 221 with code (223) Rear bench seat with electrically adjustable outer seats with PRE-SAFE positioning function for outer seats and outer head restraints |
GF91.29-P-5250LE | |
| Left front seat control unit, component description | N32/1 | GF91.29-P-5230LE | |
| Right front seat control unit, component description | N32/2 | GF91.29-P-5240LE | |
| Multicontour seat control unit (MCS), component description | N32/15, N32/16 with code (409) Left/right front multicontour seats |
GF91.25-P-5201LE | |
| N32/20, N32/21 Model 221 with code (406) Multicontour seats in rear |
GF91.25-P-5201LEA | ||
| Left front door control unit, component description | N69/1 Model 221 |
GF72.29-P-4141LE | |
| Left door control unit, component description | N69/1 Model 216 |
GF72.29-P-4124LA | |
| Right front door control unit, component description | N69/2 Model 221 |
GF72.29-P-4142LE | |
| Right door control unit, component description | N69/2 Model 216 |
GF72.29-P-4128LA | |
| Rear door control unit, component description | N69/3, N69/4 Model 221 |
GF72.29-P-6020LE | |
| RCP [HBF] control unit, component description | N72/2 Model 221 with code (406) Rear multicontour seat |
GF54.21-P-4510LE | |
| Component description for EIS [EZS] control unit | N73 | GF80.57-P-6003LE | |
| Central gateway control unit, component description | N93 | GF54.21-P-4170LE |