Steering column drive position recognition microswitch position/task/design/function - GF46.15-P-4102S: Notes
MODEL 215, 220
| Microswitch for steering column driving position recognition, location | GF46.15-P-4102-01S | ||
| Microswitch for steering column driving position recognition, task | When operated, the microswitch for steering column driving position (M20s1) signals that the steering column is located in the driving position in driving mode and the protective effect of the driver's airbag is not impaired in the event of an accident. | ||
| Microswitch for steering column driving position recognition, design | The microswitch has two switching states (operated and not operated) and is operated by moving the steering column. | ||
| Microswitch for steering column driving position recognition, function | The switching status of the microswitch is read in by the left front SAM control module (N10/6) and from there placed on the CAN bus as a message. |