DTC B14F3-76: Driver Monitoring Camera Unit Aiming Error

B14F3-76: (VCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Driver monitoring camera unit aiming error
Detection condition	The vehicle control module (VCM) detects that the aiming adjustment is failed while the driver monitoring camera unit aiming adjustment is implemented.
Fail-safe	(See DTC TABLE [VCM] .)
Possible cause	Internal malfunction related DTCs are stored in the following modules. Vehicle control module (VCM) (See DTC TABLE [VCM] .) Body control module (BCM) (See DTC TABLE [BCM] .) DTCs are stored in the driver monitoring camera unit. (See DTC TABLE [DMC] .) Driver monitoring camera unit aiming adjustment malfunction (aiming adjustment error) Driver monitoring camera unit malfunction (Refer to DRIVER MONITORING CAMERA UNIT REMOVAL/INSTALLATION in service information.) Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable