LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> 3 S >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> On-Board Diagnostic - Body Control Module (BCM) (2 Of 2) >> DTC U0336-82: Error Signal Received From SAS Control Module

DTC U0336-82: Error Signal Received From SAS Control Module

U0336-82: (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Error signal received from SAS control module
Detection condition
  • The body control module (BCM) received CAN error signal from the SAS control module.
Fail-safe
  • Not applicable
Possible cause
  1. DTCs are stored in the SAS control module. (See DTC TABLE [SAS] .)
  2. SAS control module malfunction (Refer to SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] in service information.)
  3. Body control module (BCM) malfunction (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure
  1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram
  • Not applicable
scientia non olet · About LEMON Manuals