LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Power Systems) >> Fuse Block Removal/Installation >> Removal

Fuse Block Removal/Installation: Removal

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the scuff plate (LH). (See SCUFF PLATE REMOVAL/INSTALLATION .)
  3. Remove the front side trim (LH). (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    CAUTION:
    • If the fuse block is removed with the fuses left installed, fuses may contact the parts around the fuse block and fuses may be damaged. Before removing the fuse block, remove all the fuses.
  4. Remove all the fuses.
  5. Remove the bolt.
    Fig 1: Removing Fuse Block
    G10955047Courtesy of MAZDA MOTORS CORP.
  6. Cut the bands.
  7. Pull out the fuse block clip from the body.
    Fig 2: Pulling Out Fuse Block Clip From Body
    G10955048Courtesy of MAZDA MOTORS CORP.
  8. Set the removed fuse block aside so that it does not scratch the vehicle and parts.
scientia non olet · About LEMON Manuals