DTC C0082-68: Abs Control [DSC HU/Cm]: Notes

DTC C0082:68 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0082:68	ABS control
DETECTION CONDITION		ABS control continuing for 60 s or more is detected. NOTE: The DTC may occur if the vehicle is driven under the following conditions. ABS operates continuously over long distances and long periods when braking on slippery road surfaces Wheel speed differences occur due to differences in tire tread wear or tire diameter Decreased pressure or hold condition continues for 1.28 s on all wheels NOTE: The DTC may occur if the vehicle is driven under the following conditions. Decreased pressure/hold condition continues due to vehicle spin Decreased pressure/hold condition continues because friction coefficient between road surface and tires is significantly low and there is no grip force recovery even with ABS control
FAIL-SAFE FUNCTION		Refer to "Fail-safe function table". (See DTC TABLE [DSC HU/CM] .)
POSSIBLE CAUSE		Friction coefficient between road surface and tires is significantly low such as when driving on slippery road surfaces. There is significant wear on individual tires. Tires with differing diameters have been installed. DSC HU/CM internal malfunction
SYSTEM WIRING DIAGRAM		-