LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-30 Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Shift Panel Removal/Installation

Shift Panel Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the following parts:
    1. Shift lever knob (MTX)
    2. Selector lever knob (ATX) (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
    3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    4. Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
  3. Insert a remover tool into the position shown in the figure.
    G13560794
  4. Move the remover tool in the direction of the arrow shown in the figure and detach the clip.
    G13560795
  5. Move the shift panel in the order of arrows (1), (2), and (3) shown in the figure, and detach the clips.
    G13560796
  6. Disconnect the connector. (ATX)
    G13560797
  7. Disconnect the connectors.
    G13560798
  8. Remove the shift panel.
  9. Install in the reverse order of removal.
    NOTE:
scientia non olet · About LEMON Manuals