LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Basic System >> Rear Heat Duct Removal/Installation >> Passenger-side

Rear Heat Duct Removal/Installation: Passenger-side

  1. Slide the front seat rearward.
  2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Audio amplifier (with Bose ®) (See AUDIO AMPLIFIER REMOVAL/INSTALLATION .)
    2. Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    3. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    4. Passenger-side side wall (See SIDE WALL REMOVAL/INSTALLATION .)
    5. Passenger-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION .)
  4. Remove the fastener.
    G11431331Courtesy of MAZDA MOTORS CORP.
  5. Turn the floor covering over.
  6. Remove the fastener.
    G11431332Courtesy of MAZDA MOTORS CORP.
  7. Remove the rear heat duct.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals