Mirror Glass Adjustment

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the following parts:
1. Power window main switch (Driver-side) (Refer to POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
2. Power window subswitch (Passenger-side) (Refer to POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
3. Front door trim (Refer to FRONT DOOR TRIM REMOVAL/INSTALLATION .)
4. Front door speaker (Refer to FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
5. Power outer mirror (Refer to POWER OUTER MIRROR REMOVAL/INSTALLATION .)

Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.

B+ terminal	Ground terminal	Operation
C	F	Up
F	C	Down
I	F	Left
F	I	Right

Fig 1: Power Outer Mirror Circuit Diagram

Courtesy of MAZDA MOTORS CORP.

If the power outer mirror does not operate as indicated in the table, replace the power outer mirror. (Refer to POWER OUTER MIRROR REMOVAL/INSTALLATION .)