LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Conventional Brake System) >> Power Brake Unit Inspection >> Using SST >> After-inspection procedure

After-inspection procedure

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the inspection, remove the SSTs  , install the brake pipe to the original position, and then bleed the air from the brake line. (See BRAKE HOSE (FRONT) REMOVAL/INSTALLATION .) (See BRAKE FLUID AIR BLEEDING .)
scientia non olet · About LEMON Manuals