Front Turn Light Inspection

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

STEP	INSPECTION		ACTION
1	VISUALLY INSPECT FRONT TURN LIGHT BULB NOTE: Verify that the front turn light bulb is not burned out Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .) Remove the front turn light bulb. (See FRONT TURN LIGHT BULB REMOVAL/INSTALLATION .) Is the front turn light bulb normal?	Yes	Replace the front turn light short cord, then go to the next step. (See FRONT TURN LIGHT SHORT CORD REMOVAL/INSTALLATION .)
1		No	Replace the front turn light bulb, then go to the next step. (See FRONT TURN LIGHT BULB REMOVAL/INSTALLATION .)
2	VERIFY THAT INSPECTION IS COMPLETED Reconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .) Operate the turn switch to the left or right turn position. Does the front turn light operate normally?	Yes	Inspection is completed.
2		No	Replace the front turn light. (See FRONT TURN LIGHT REMOVAL/INSTALLATION .)