LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Auxiliary Port Valve (APV) Position Sensor Removal/Installation >> APV Position Sensor No. 1

APV Position Sensor No. 1

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
  2. Disconnect the negative battery cable.
  3. Remove the battery. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
  4. Remove the battery tray. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
  5. Remove the air control valve. (See SECONDARY AIR INJECTION (AIR) CONTROL VALVE REMOVAL/INSTALLATION )
  6. Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [13B-MSP] )
  7. Disconnect the SSV switch connector.
  8. Disconnect the APV position sensor No. 1 connector.
  9. Remove the APV position sensor No. 1.
  10. Install in the reverse order of removal.
Fig 1: APV Position Sensor No. 1 With Mounting Bolt With Torque Specifications
G05981126Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals