LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System [LF, L5]) >> Camshaft Position (CMP) Sensor Inspection >> Visual Inspection

Visual Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] .)
  2. Disconnect the negative battery cable.
  3. Remove the plug hole plate.(See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  4. Disconnect the CMP sensor connector.
  5. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
  6. Verify that there are no metal shavings on the CMP sensor.
    • Remove any metal shavings that are adhering.
scientia non olet · About LEMON Manuals