DTC P06B8 After KAM Reset Or Pcm Reprogramming (6860)

WARNING: This page is about the 6 i Grand Touring, 2.5 A, Automatic, which is a different variant/trim than selected.

Publication date: 2010-01-01
Reference number: 6860

DTC P06B8 AFTER KAM RESET OR PCM REPROGRAMMING

TECHNICAL INFORMATION TIPS

Reference Number(s): 6860

MAZDA:	2009 Mazda6, Tribute
RELATED REFERENCE NUMBER(S):	MTOL

APPLICABLE MODELS

Model	Starting S/N	Ending S/N	Model Spec
Tribute 2009-2009	000000	ZZZZZZ
Mazda6 2009-2009	000000	ZZZZZZ	V-6 ONLY

RELATED CATEGORY/SUBCATEGORY/SYMPTOMS

Engine / Fuel System / Does Not Turn-Off/Warning Light

Engine / On-Board Diagnostics / Does Not Turn-Off/Warning Light

MTOL - 6860 DEALER REPAIR INFORMATION

Symptom and Conditions

Some vehicles may exhibit DTC P06B8 after PCM reflash or PCM KAM is cleared with IDS.

Repair Procedure

Ensure that IDS is at version 60.07 or later. Select self test, then select all CMDTCS. Select erase. Turn key "Off" for 10 seconds then start the engine and let idle for 10 seconds. Again shut key "Off" for 10 seconds and recheck DTC's, if P06B8 is still present follow normal WSM diagnostics.