LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 01

Check code 01

CHECK CODE 01 INSPECTION

Check code 01 Buckle switch ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
1 Unfasten driver-side seat belt. (Buckle switch on.)
G04564667Courtesy of MAZDA MOTORS CORP.
 Go to next step.
G04564668Courtesy of MAZDA MOTORS CORP.
 Measure voltage at instrument cluster terminal 2A. Is voltage 0 V? 
  • If as specified, replace instrument cluster.
  • If not as specified, inspect following parts.
    • Buckle switch
    • Wiring harness (Buckle switch-instrument cluster)
2 Fasten driver-side seat belt. (Buckle switch off.)
G04564669Courtesy of MAZDA MOTORS CORP.
 Measure voltage at instrument cluster terminal 2A. Is voltage B+? 
  • If as specified, replace instrument cluster.
  • If not as specified, inspect following parts.
    • Buckle switch
    • Wiring harness (Buckle switch-instrument cluster)
G04564670Courtesy of MAZDA MOTORS CORP.
 Input signal to instrument cluster is okay.
scientia non olet · About LEMON Manuals