LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> RX-8 Touring, 1.3 3 >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 04

Check code 04

CHECK CODE 04 INSPECTION

Check code 04 Door switch ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
1 Open the front driver-side door. (The door switch is on.)
G04564671Courtesy of MAZDA MOTORS CORP.
 Close the front driver-side door, then go to the next step.
G04564672Courtesy of MAZDA MOTORS CORP.
 Verify that the voltage of the instrument cluster terminal 2E is 1.0 V or less. 
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • Door switch
    • Wiring harness (Instrument cluster-door switch)
2 Close all doors.(Door switches are off.)
G04564673Courtesy of MAZDA MOTORS CORP.
 Verify that the voltage of the instrument cluster terminal 2E is B+. 
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • Door switch
    • Wiring harness (Instrument cluster-door switch)
G04564674Courtesy of MAZDA MOTORS CORP.
 Input signal to the instrument cluster is normal.
scientia non olet · About LEMON Manuals