LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Security System And Locks System) >> Hood Latch & Release Lever Removal/Installation >> Notes

Hood Latch & Release Lever Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. To remove the hood latch, remove the seal plate. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in Fig 1.
    Fig 1: Removing/Installing Hood Latch & Release Lever
    G01344412Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
  4. Adjust the hood. (See HOOD ADJUSTMENT .)
scientia non olet · About LEMON Manuals