LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Body Panels >> Valance Panel Removal/Installation

Valance Panel Removal/Installation

  1. Remove the front bumper bracket. See BUMPER BRACKET FRONT REMOVAL/INSTALLATION .
  2. Remove the front valance panel.
    • Remove the bolts (three each side).
    • Drill out the plastic pop rivets (one each side).
    • Unclip the front valance panel.
  3. Install in reverse order of removal.
    1. Tightening torque 
      1. 2.7 - 3.7 N.m (27.5 - 37.7 kgf.cm, 23 - 34 in.lbf) 
scientia non olet · About LEMON Manuals